Stjarnagloss Glö Hydrophobic Snow Foam 1L
Description
NEW Glö – Protective Snow Foam with Gloss & Beading
Add instant gloss and hydrophobic protection after your contact wash—effortlessly.
What happens when you combine Glatt and Snö?
You get Glö: a protective snow foam that merges the fun of snow foaming with the beading we all crave, all in one simple post-wash step.
Designed to be used after the pre-wash and contact wash stages, Glö is applied just like a traditional snow foam—but instead of watching dirt slide away, you’ll see (and hear) the foam crackle and disperse, leaving paintwork and glass unbelievably glossy and covered in tall, proud water beads.
Rinse, towel dry, and stand back.
The car will be glowing.
Why Choose Glö – Protective Snow Foam?
Gloss & Protection in One Step
Adds a slick, glossy finish and a hydrophobic protective layer without additional sealants or sprays.
Snow Foam Meets Beading
Combines the visual satisfaction of snow foaming with the instant gratification of water repellency.
Efficient & Economical
A single litre of Glö concentrate delivers approximately 20–40 protective layers, meaning you won’t use anywhere near a full lance per car.
Designed for Pressure Washer Use
For best results, apply with a professional snow foam cannon and a pressure washer capable of 130 bar or more.
For maximum cleaning before protection, pair Glö with Snö X Intensive Snow Foam Pre-Wash.
IMPORTANT – Snow Foam Cannon Care
⚠️ You MUST rinse out your snow foam cannon after using Glö.
All hydrophobic or sealant-based snow foams can gum up the gauze and internals of snow foam lances if not flushed properly.
After applying Glö:
-
Run at least 1 litre of clean water through the snow foam lance
-
Do this every time after use
Failure to flush the lance may result in reduced performance or blockage.
We cannot accept liability for snow foam cannons that fail due to improper cleaning. Replacement gauzes and lance cleaning guides are widely available online.
How to Use Glö
Application
Apply Glö using a professional snow foam cannon with a pressure washer rated at 130 bar or higher.
If using a lower-powered washer, a stronger dilution may be required.
Dilution
Start with 100ml of Glö in a 1-litre lance bottle. Adjust concentration up or down as required.
Coverage
Foam the vehicle evenly, ensuring full coverage.
Do not allow the foam to dry and never apply to hot panels.
Rinse
Allow the foam to dwell briefly, then rinse thoroughly with clean water.
Dry
Towel dry the vehicle to reveal enhanced gloss and strong water beading.
Mixing Guide
1 Litre Bottle
-
Use 50–100ml per fill
-
Produces 20+ litres of usable snow foam
-
Enough for approximately 30–40 car applications
Will it fit my car?
We totally understand if you're not certain a part will be compatible with your car, so we highly recommend contacting us here with your query. Our friendly sales team will then be in touch to confirm if this part is the correct part you are looking for.
Shipping
All orders made through MOD Central will be passed immediately to the supplier (Diversion Automotive) that has ships the item. You will get an email from them on the point of sale about processing and dispatch time.
Shipping Costs:
The cost of shipping will be calculated at checkout based on the destination, weight of the product and which vendor/vendors you are buying from.
Shipping Providers:
All our vendors work with trusted shipping partners to ensure your products are delivered safely. However, we are not responsible for any shipping delays, damages, or losses.
International Shipping:
Many of our vendors offer international shipping, but please be aware that additional customs fees or import taxes may apply. These charges are the responsibility of the buyer.
Tracking Information:
Once your order has been dispatched, you will receive a confirmation email with tracking details from the vendor your product was purchased from. If you have not received your tracking information, please contact the vendor with your order number.
Returns/Warranty
Eligibility:
All return eligibility will be specific to the vendor.
Return & Refund Process:
To initiate a return, please contact the vendor you purchased the product from with your order number and reason for return. Their team will provide further instructions.